if the air conditioner stops unexpectedly due to the power cut, it will restart with the previous function setting automatically when the power resumes
.Emergency Function When temperature sensor error happens, the air conditioner will display on error code and stop immediately.
Intelligent Anti-cold-air Function
When starting the heating operation, the fan speed is regulated automatically from the lowest grade to the preset level, according to the temperature rising of evaporator. This function can prevent cold air blowing out at the beginning of the operation, which avoids
Wide Operation Range
Up to 25 stages (F1~F25) of compressor frequency, and frequency range increased around 70%. More comfortable and energy saving due to smooth and accurate control. With advanced frequency-adjusting technology, compressor preheating function and electrical heating belts, the unit can operate heating as low as -20°C
Cold Catalyst Filter
Eliminate formaldehyde and other volatile organic compounds (VOCs) as well as harmful gases and odors.
With this function, the air conditioner will maximize the output of cooling or heating capacity, make the room cool down or heat up rapidly, and attain the desired temperature in the shortest time
.Refrigerant Leakage Detect
With this new technology, the indoor unit will alarm when the outdoor unit detects refrigerant leakage
Multi indoor fan speeds With up to 12 indoor fan speeds, a more comfortable air flow is provided .Low Ambient Cooling The air conditioner with a special built-in Low Ambient Kit can be used in temperature as low as -15°C for cooling operation.
Based on different installation height of indoor unit, the temperature deviation of the sensor sensed against the jumping wires combination on the indoor PCB is possible to compensate the deviation.
5 Grades Outdoor Fan Speeds Due to DC fan motor, outdoor fan speeds increases from 2 grades to 5 grades, more comfortable and energy saving.
Intelligent on-off technology enables mitsui products automatically enter energy-saving mode when standby, cut energy consumption from normal 4-5W to 1W which counts 80% of saving